Silvercrest SBTF 10 C2 Instrucciones de operaciones descargar pdf (Pagina 12)

• To switch the device off, press and hold the multi-function button 7 for about

3 seconds. A long, low signal tone will be heard and the LED status display 6

extinguishes.

• Position the hands-free appliance and the mobile telephone so that they are

not more than 1 metre away from each other.

• Press and hold down the multi-function button 7 for 6 seconds until, after

3 seconds a short, high signal tone and after a further 3 seconds a succes-

sion of low and high signal tones are heard. The LED status display 6 lights

up constantly and the hands-free equipment is now in the coupling mode.

• Select the hands-free provision „Car Kit“ from the list of available appliances

for the mobile telephone.

• Enter in the pre-programmed passcode "9999" and then confirm it, which

couples the appliances with each other. You will hear a long high signal tone

and the LED status indicator 6 blinks every 3 seconds.

• You can now use the hands-free appliance.

Note:

When using the latest mobile phones, (Smartphones) those that are equipped

with Bluetooth 2.0 or a more modern version, it is possible that the pass code

"9999" need not be entered. If the coupling is not completed within 2 minutes,

the hands-free appliance switches itself off. The LED status display 6 extinguis-

hes and you will hear a long and deep signal tone. With some mobile telepho-

nes it is possible that coupling does not automatically take place. In this case

coupling must be carried out additionally on the mobile telephone. The LED status

display 6 blinks twice every 3 seconds until this has been carried out. Further in-

formation can be found in your mobile telephone’s operating instructions.

IB_69169_SBTF10B2_GB.qxd 29.09.2011 10:22 Uhr Seite 10

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 38 39

Sin comentarios

Silvercrest SBTF 10 C2 Instrucciones de operaciones Pagina 12