Silvercrest SKAS 1000 A16 Especificaciones descargar pdf (Pagina 17)

Section 2

Fault Code Diagnostics

Inactive Fault Codes

NOTE: All inactive fault codes will steadily display

for approximately 1-1/2 seconds each. Ignore fault

codes that flash. When the TCU has listed all

inactive fault codes, the list will repeat.

1. The TCU will begin to list the inactive fault

codes on the instrument panel display.

2. Record the fault codes.

NOTE: ISO display codes may not be available on

vehicles built prior to January 2006.

3. When you’re finished retrieving fault codes,

release the NEUTRAL and FUNCTION buttons,

and the service brake. Turn the ignition OFF.

To View Active or Inactive Fault Codes

Again

Repeat the previous steps.

How to Clear Inactive Fault Codes

from TCU Memory

NOTE: Inactive faults are repaired active faults

that have not been cleared from TCU memory.

1. The vehicle must be stationary to clear

inactive fault codes. Park the vehicle and set

the parking brake. Turn the engine OFF. Turn

the ignition OFF.

2. Press and hold the NEUTRAL button and the

FUNCTION button at the same time.

3. Turn the ignition ON. Do not start the engine.

Count to three and release both buttons.

4. Count to three and press and hold the

NEUTRAL button and the FUNCTION button at

the same time.

5. Turn the ignition OFF. Count to three and

release both buttons. The fault codes will be

cleared from TCU memory.

How to Retrieve Active and Inactive

SAE and ISO Fault Codes from the

Instrument Panel Display Using a

Steering Column-Mount Shift Lever

NOTE: The vehicle must be stationary.

1. Park the vehicle and set the parking brake.

Turn the engine OFF, but leave the ignition ON.

Prepare to record the fault codes before you

begin to retrieve them from the instrument

panel display.

2. Use the following procedures to retrieve active

and inactive SAE and ISO fault codes.

Active Fault Codes

NOTE: All active fault codes will steadily display

for approximately 1-1/2 seconds each. Ignore fault

codes that flash. When the TCU has listed all

active fault codes, the list will repeat.

1. The TCU will begin to list the active fault codes

on the instrument panel display.

2. Record the fault codes. When you’re finished,

turn the ignition OFF.

NOTE: ISO display codes may not be available on

vehicles built prior to January 2006.

앫 To view the fault codes again: Repeat

Step 1.

Inactive Fault Codes

NOTE: All inactive fault codes will steadily display

for approximately 1-1/2 seconds each. Ignore fault

codes that flash. When the TCU has listed all

active fault codes, the list will repeat.

Shifter

Inactive SAE

Display Codes

Inactive ISO Display

Codes

FreedomLine

Transmission

Shifter

“With brake

pedal

depressed”

Neutral +

Function

“With brake pedal

depressed”

Neutral + Function +

Downshift

Shifter

Active SAE

Display Codes

Active ISO Display

Codes

Analog Shifter

(Freightliner and

Sterling Vehicles

Only)

Neutral +

Manual + Up

Neutral + Manual +

Down

Shifter

Inactive SAE

Display Codes

Inactive ISO Display

Codes

Analog Shifter

(Freightliner and

Sterling Vehicles

Only)

“With brake

pedal

depressed”

Neutral +

Manual + Up

“With brake pedal

depressed”

Neutral + Manual +

Down

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 191 192

Comentarios a estos manuales

Sin comentarios

Silvercrest SKAS 1000 A16 Especificaciones Pagina 17

Comentarios a estos manuales

Relacionado con productos y manuales para Cafeteras Silvercrest SKAS 1000 A16